Skip to main content

M89.6 ICD-10-CM Code: Osteopathy after poliomyelitis

Compare with another code for M89.6Check this code on a claim

Billing Status: NO. This is a non-billable ICD-10-CM code: report a more specific billable code beneath it.

Coding at a Glance

Official instructions
2 Excludes1 · 1 use-additional instruction

What these terms mean →

Not billable · FY2027A non-billable heading in the tabular list: report a more specific code beneath it.

What you need to know

Source: CMS/NCHS Official ICD-10-CM tabular notes, quoted. From the CMS/NCHS tabular list for the release in force. A note the category or block publishes applies to this code too, and is marked with where it comes from.

Use additional codeReport with this code when documented
  • Use additional code (B91) to identify previous poliomyelitis
Excludes1Not reported with this code unless documented as unrelated
  • postpolio syndrome (G14)
  • postprocedural osteopathies (M96.-) (from M86-M90)

Where it sits Source: CMS/NCHS

Under:Chapter 13: Diseases of the Musculoskeletal System and Connective TissueM80-M94 Osteopathies and chondropathiesM86-M90 Other osteopathiesM89 Other disorders of bone

Codes under M89.6 (10)

  • M89.60Osteopathy after poliomyelitis, unspecified siteBillable
  • M89.61Osteopathy after poliomyelitis, shoulderNot billable
  • M89.62Osteopathy after poliomyelitis, upper armNot billable
  • M89.63Osteopathy after poliomyelitis, forearmNot billable
  • M89.64Osteopathy after poliomyelitis, handNot billable
  • M89.65Osteopathy after poliomyelitis, thighNot billable
  • M89.66Osteopathy after poliomyelitis, lower legNot billable
  • M89.67Osteopathy after poliomyelitis, ankle and footNot billable
  • M89.68Osteopathy after poliomyelitis, other siteBillable
  • M89.69Osteopathy after poliomyelitis, multiple sitesBillable

Most relevant related codes MedCoder-derived

Read off the official notes above and this code’s own position in the tabular list. Which to report is a documentation question; Compare shows the two side by side.

CompareCheck ClaimView Related Codes

Coding instructions

Official Tabular Instructional Notes: the inclusion, exclusion and sequencing notes published for M89.6 in the official ICD-10-CM tabular list, quoted as published.

Source: CMS/CDC — ICD-10-CM Tabular ListRelease: FY2027Effective: October 1, 2026

Trace:FY2027 changesChange historyRelease, file and checksum

Notes without a marker are published on M89.6 itself; “inherited from” names the category or block whose note applies here.

Excludes1 — Not Coded Here

Conditions generally not reported together with this code (Excludes1) -- an error unless the two conditions are documented as unrelated to each other (ICD-10-CM Official Guidelines, Section I.A.12.a).

Use Additional Code

Supplementary codes the tabular list directs you to add.

  • Use additional code (B91) to identify previous poliomyelitis

Coder workflow for M89.6

MedCoder structured workflow — derived from this code’s own official record

Before you code M89.6

  1. M89.6 is not reportable as written. Select the more specific code beneath it that the documentation supports. Codes are reported to the highest level of specificity the classification provides (Guidelines I.B.2).

    ReviewM89.60, M89.61, M89.62, M89.63, M89.64, M89.65

    See the relationships section · Guide: How to choose an ICD-10-CM code →

  2. Check the Excludes1 note: if the documentation supports a condition named there, do not simply proceed with the code beneath M89.6. Excludes1 conditions are not reported together with this code unless the record shows they are unrelated (Guidelines I.A.12.a).

    See the official tabular notes

Choose the right path

  1. Does the documentation support one of the more specific codes beneath M89.6?
    Yes → Select that code and continue the checks below on its own page.
    No → M89.6 cannot be reported as written. Where the codes beneath it include an unspecified code, that code applies when the record goes no further; otherwise query for the missing detail.

    ReviewM89.60, M89.61, M89.62, M89.63, M89.64, M89.65

  2. Does the documentation support a condition named in M89.6’s Excludes1 note?
    Yes → Do not simply proceed: review the excluded code. Both are reported only when the record shows the two conditions are unrelated.
    No → Continue.

    ReviewG14, M96

Report the code beneath M89.6 that the documentation supports, not M89.6 itself. Then work the Use Additional Code note, and confirm that code is valid for the date of service on its own page.

Documentation check

The provider’s diagnostic statement
Codes are assigned from the provider’s documented diagnosis, not from clinical criteria, test values or a medication list (Guidelines I.A.19).
The conditions the Use Additional Code note names
Reported with this code when documented; a conditional instruction (“if applicable”, “if known”) applies only when the record supports it.

Official instructions as workflow

  • Excludes1 — check before selecting M89.6(2 notes)

    Coding workflow: If the documentation supports a condition named in this note, do not simply proceed with M89.6: the two are not reported together. The one exception is when the record shows the two conditions are unrelated to each other.

    CompareG14, M96

    See the official tabular notes · Guidelines I.A.12.a

  • Use Additional Code — after identifying M89.6(1 note)

    Coding workflow: Check whether the documentation supports the additional code(s) the note names, and report them with M89.6 when it does. Where the instruction is conditional (“if applicable”, “if known”), it applies only when the record documents the condition.

    ReviewB91

    See the official tabular notes · Guidelines I.A.13

Coding decision scenarios

Pattern scenarios for this code’s structure — decision rules, not clinical cases

Documentation: Both the condition M89.6 describes and a condition named in its Excludes1 note are documented for the same encounter.

Coding question: Can both codes be reported?

Path: Review the Excludes1 note and the excluded code, and look for a provider statement on whether the two conditions are related.

Reason: Excludes1 means the two are not coded together; the exception is when the record shows the conditions are unrelated to each other (Guidelines I.A.12.a).

ReviewG14, M96

Documentation: A condition the Use Additional Code note names is documented.

Coding question: Is a second code reported with the code beneath M89.6?

Path: Review the Use Additional Code note and the code it names.

Reason: The additional code is reported when the record documents the condition; a conditional instruction applies only when its condition is met (Guidelines I.A.13).

ReviewB91

Every row is derived from this code’s own record — its title, tabular notes, 7th-character family and same-category siblings — with fixed MedCoder wording; nothing is inferred about a patient. The official notes and guideline text are in the sections each row links to, and they control.

Don’t confuse M89.6 with…

MedCoder analysis — pairs from this code’s official notes, distinctions written by MedCoder

The codes most likely to be picked instead of M89.6 — named in its own official notes, or sharing its laterality or encounter family — with what separates them and which documentation moves the case. Each links to the full comparison.

  • G14— Excludes1 conflict (Excludes1 — generally not reported together)

    Not coded here — the tabular list excludes this pair for the same encounter.

    Not reported together with this code, except where the two conditions are documented as unrelated.

    What moves you there: Documentation of postpolio syndrome moves the case to G14; the two are not reported together unless documented as unrelated.

    Full comparison: M89.6 vs G14 →

  • M96— Excludes1 conflict (Excludes1 — generally not reported together)

    Not coded here — the tabular list excludes this pair for the same encounter.

    Not reported together with this code, except where the two conditions are documented as unrelated.

    What moves you there: Documentation of postprocedural osteopathies moves the case to M96; the two are not reported together unless documented as unrelated.

    Full comparison: M89.6 vs M96 →

Relationships are read from this code's own official notes, its laterality siblings and its encounter family; the wording of each distinction is MedCoder editorial, and the documentation named in each “what moves you there” line is the official note phrase or sibling title itself. Source: CMS ICD-10-CM tabular instructional notes; ICD-10-CM Official Guidelines, Section I.A.12.a.

Coding context

Guidelines, coding notes, decision aids, relationships (with MS-DRG and CCSR classification), hierarchy, HCC, coverage and the context map: what a coder reaches for after the core. Each section names whether it is official source data, a MedCoder-derived relationship or MedCoder editorial.

Code Overview

Osteopathy after poliomyelitis is a non-billable ICD-10-CM category code (M89.6). A more specific billable subcode must be selected for claims submission.

MedCoder summary Summary composed by MedCoder from this code's official ICD-10-CM record. The tabular instructional notes themselves appear verbatim below.

Verify Before Coding

From the code registry, the Medicare Code Editor, and the MS-DRG Definitions Manual. Check it against a full claim in Claim Check.

Contextual Map

Every relationship of M89.6 in one view: hierarchy, official tabular instructions in both directions, clinical classification, risk adjustment, MS-DRG participation, index terms and change history — each edge carrying the CMS source it derives from.

Run M89.6 with these 2 related codes in Claim Check

Hierarchy

Excludes1

  • G14 — Postpolio syndrome[Excludes1]: “postpolio syndrome (G14)”— CMS ICD-10-CM tabular instructional notes · icd10cm-fy2027

Use Additional Code

  • B91 — Sequelae of poliomyelitis[Use Additional Code]: “code (B91) to identify previous poliomyelitis”— CMS ICD-10-CM tabular instructional notes · icd10cm-fy2027

Nearest codes (40)

Change history

  • FY2016 — In the code set at ICD-10-CM adoption [Change history]— CMS release files (code change ledger) · icd10cm-fy2016

Reference

Index terms and tables, published questions and FAQ, every source behind this page with its release and checksum, the date-of-service check and the complete change history.

Common coding questions

MedCoder editorial

Can M89.6 be billed directly?

No. M89.6 (Osteopathy after poliomyelitis) is a non-billable ICD-10-CM category code. A more specific billable subcode must be selected based on clinical documentation.

Sources for this page

Codes, titles, notes, index terms and mappings on this page are transcribed from the datasets below. Relationships MedCoder computed and text MedCoder wrote are labelled where they appear.

Code, title, tabular notes and index terms Official source data
CMS/CDC ICD-10-CM FY2027 tabular list, index and tables, effective October 1, 2026 Release, file and checksum · Publisher’s page
Claim edits Official source data
CMS Definitions of Medicare Code Edits — v44.0 (October 2026) Release, file and checksum · Publisher’s page
Change history and date-of-service validity Official source data
CMS ICD-10-CM release addenda, ingested release by release into the change ledger Release, file and checksum · Publisher’s page
Comparisons, relationships and the contextual map MedCoder-derived relationship
Computed by MedCoder from the tabular notes and tables above; every derived relationship is marked as derived where it appears
Summary and FAQ answers MedCoder editorial explanation
Written by MedCoder to explain the sources above: drafted with AI assistance, checked by a person against the release files, and labelled as MedCoder text where it appears. Not official text.

Current data releases:ICD-10-CM FY2027 · ICD-10-PCS FY2027 · HCPCS October 2026 · MS-DRG v44 · Medicare Code Editor v44.0 · NCCI PTP Q4 2026 · MUE Q4 2026 · NCD code lists 2026-01 · LCD export September 28, 2026 · All releases and sources

Labels on this page: Official source data · MedCoder-derived relationship · MedCoder editorial explanation. How to read the labels · All data sources and release dates · CMS coding rules

Cite this page

Reference this page in a research guide, syllabus or article. The release is included because code content changes each year.

MedCoder.ai. "M89.6 — Osteopathy after poliomyelitis." ICD-10-CM FY2027. https://medcoder.ai/icd10/code/m89.6-osteopathy-after-poliomyelitis

Change history

  • FY2016 — October 1, 2015
    In the code set at ICD-10-CM adoption
    Osteopathy after poliomyelitis

No changes since FY2016 — additions, deletions, description changes and billable-status changes are tracked through FY2027, and none are recorded for this code. Note changes are tracked from FY2027 only.

Nearest Codes in This Family

Official ICD-10-CM classifications closest to M89.6 in its code family, with their registry titles.

View all codes in the M89 family