Skip to main content

M90.8 ICD-10-CM Code: Osteopathy in diseases classified elsewhere

Billing Status: NO. This is a non-billable ICD-10-CM code: report a more specific billable code beneath it.

Coding at a Glance

Tabular directives
10 Excludes1 · 3 code-first instructions

Coding instructions

Official Tabular Instructional Notes: the inclusion, exclusion and sequencing notes published for M90.8 in the official ICD-10-CM tabular list, quoted as published.

Source: CMS/CDC — ICD-10-CM Tabular ListRelease: FY2027Effective: October 1, 2026

Trace:FY2027 changesChange historyRelease, file and checksum

Notes without a marker are published on M90.8 itself; “inherited from” names the category or block whose note applies here.

Excludes1 — Not Coded Here

Conditions generally not reported together with this code (Excludes1) -- an error unless the two conditions are documented as unrelated to each other (ICD-10-CM Official Guidelines, Section I.A.12.a).

Code First

Underlying conditions that must be sequenced before this code.

  • underlying disease, such as:
  • rickets (E55.0)
  • vitamin-D-resistant rickets (E83.31)

Coder workflow for M90.8

MedCoder structured workflow — derived from this code’s own official record

Before you code M90.8

  1. M90.8 is not reportable as written. Select the more specific code beneath it that the documentation supports. Codes are reported to the highest level of specificity the classification provides (Guidelines I.B.2).

    ReviewM90.80, M90.81, M90.82, M90.83, M90.84, M90.85

    See the relationships section · Guide: How to choose an ICD-10-CM code →

  2. M90.8 is a manifestation code (“in diseases classified elsewhere”). Confirm the underlying condition is documented and sequence it first; a manifestation code is not reported as the first-listed or principal diagnosis. The etiology/manifestation convention (Guidelines I.A.13).

    See the official tabular notes · Guide: Manifestation codes and Code First sequencing →

  3. Check the Excludes1 note: if the documentation supports a condition named there, do not simply proceed with M90.8. Excludes1 conditions are not reported together with this code unless the record shows they are unrelated (Guidelines I.A.12.a).

    See the official tabular notes

Choose the right path

  1. Does the documentation support one of the more specific codes beneath M90.8?
    Yes → Select that code and continue the checks below on its own page.
    No → M90.8 cannot be reported as written; query for the specificity its subcategory needs.

    ReviewM90.80, M90.81, M90.82, M90.83, M90.84, M90.85

  2. Does the documentation support a condition named in M90.8’s Excludes1 note?
    Yes → Do not simply proceed: review the excluded code. Both are reported only when the record shows the two conditions are unrelated.
    No → Continue.

    ReviewB45.3, A54.43, A52.11, N25.0, A02.24, A51.46

  3. Is the underlying (etiologic) condition the Code First note names documented?
    Yes → Sequence the underlying condition first, then M90.8.
    No → A manifestation code needs its underlying condition — query before reporting it.

    ReviewE55.0, E83.31

Consider M90.8. Then confirm the code is valid for the date of service in the Verify section.

Documentation check

The provider’s diagnostic statement
Codes are assigned from the provider’s documented diagnosis, not from clinical criteria, test values or a medication list (Guidelines I.A.19).
The underlying (etiologic) condition
Named in the Code First note; sequenced before this code when documented (Guidelines I.A.13).

Official instructions as workflow

  • Excludes1 — check before selecting M90.8(10 notes)

    Coding workflow: If the documentation supports a condition named in this note, do not simply proceed with M90.8: the two are not reported together. The one exception is when the record shows the two conditions are unrelated to each other.

    CompareB45.3, A54.43, A52.11, N25.0, A02.24, A51.46

    See the official tabular notes · Guidelines I.A.12.a

  • Code First — sequencing check(3 notes)

    Coding workflow: Check whether the underlying or etiologic condition the note names is documented. When it is, sequence it before M90.8. Do not add an underlying condition the record does not document.

    ReviewE55.0, E83.31

    See the official tabular notes · Guidelines I.A.13

Coding decision scenarios

Pattern scenarios for this code’s structure — decision rules, not clinical cases

Documentation: Both the condition M90.8 describes and a condition named in its Excludes1 note are documented for the same encounter.

Coding question: Can both codes be reported?

Path: Review the Excludes1 note and the excluded code, and look for a provider statement on whether the two conditions are related.

Reason: Excludes1 means the two are not coded together; the exception is when the record shows the conditions are unrelated to each other (Guidelines I.A.12.a).

ReviewB45.3, A54.43, A52.11, N25.0, A02.24, A51.46

Documentation: The underlying condition the Code First note names is documented alongside this condition.

Coding question: How are the two sequenced?

Path: Review the Code First note.

Reason: The underlying condition is sequenced first and the manifestation follows (Guidelines I.A.13).

ReviewE55.0, E83.31

Every row is derived from this code’s own record — its title, tabular notes, 7th-character family and same-category siblings — with fixed MedCoder wording; nothing is inferred about a patient. The official notes and guideline text are in the sections each row links to, and they control.

Coding context

The comparisons, hierarchy, index entries, guidelines, relationships, risk-adjustment and coverage context a coder commonly needs. Each section names whether it is official source data, a MedCoder-derived relationship or MedCoder editorial.

Don’t confuse M90.8 with…

MedCoder analysis — pairs from this code’s official notes, distinctions written by MedCoder

The codes most likely to be picked instead of M90.8 — named in its own official notes, or sharing its laterality or encounter family — with what separates them and which documentation moves the case. Each links to the full comparison.

  • B45.3— Excludes1 conflict (Excludes1 — generally not reported together)

    Not coded here — the tabular list excludes this pair for the same encounter.

    Not reported together with this code, except where the two conditions are documented as unrelated.

    What moves you there: Documentation of cryptococcosis moves the case to B45.3; the two are not reported together unless documented as unrelated.

    Full comparison: M90.8 vs B45.3 →

  • E08— Excludes1 conflict (Excludes1 — generally not reported together)

    Not coded here — the tabular list excludes this pair for the same encounter.

    Not reported together with this code, except where the two conditions are documented as unrelated.

    What moves you there: Documentation of diabetes mellitus moves the case to E08; the two are not reported together unless documented as unrelated.

    Full comparison: M90.8 vs E08 →

  • E13— Excludes1 conflict (Excludes1 — generally not reported together)

    Not coded here — the tabular list excludes this pair for the same encounter.

    Not reported together with this code, except where the two conditions are documented as unrelated.

    What moves you there: Documentation of diabetes mellitus moves the case to E13; the two are not reported together unless documented as unrelated.

    Full comparison: M90.8 vs E13 →

  • A54.43— Excludes1 conflict (Excludes1 — generally not reported together)

    Not coded here — the tabular list excludes this pair for the same encounter.

    Not reported together with this code, except where the two conditions are documented as unrelated.

    What moves you there: Documentation of gonococcal moves the case to A54.43; the two are not reported together unless documented as unrelated.

    Full comparison: M90.8 vs A54.43 →

  • A52.11— Excludes1 conflict (Excludes1 — generally not reported together)

    Not coded here — the tabular list excludes this pair for the same encounter.

    Not reported together with this code, except where the two conditions are documented as unrelated.

    What moves you there: Documentation of neurogenic syphilis moves the case to A52.11; the two are not reported together unless documented as unrelated.

    Full comparison: M90.8 vs A52.11 →

  • N25.0— Excludes1 conflict (Excludes1 — generally not reported together)

    Not coded here — the tabular list excludes this pair for the same encounter.

    Not reported together with this code, except where the two conditions are documented as unrelated.

    What moves you there: Documentation of renal osteodystrophy moves the case to N25.0; the two are not reported together unless documented as unrelated.

    Full comparison: M90.8 vs N25.0 →

Relationships are read from this code's own official notes, its laterality siblings and its encounter family; the wording of each distinction is MedCoder editorial, and the documentation named in each “what moves you there” line is the official note phrase or sibling title itself. Source: CMS ICD-10-CM tabular instructional notes; ICD-10-CM Official Guidelines, Section I.A.12.a.

Code Overview

Osteopathy in diseases classified elsewhere is a non-billable ICD-10-CM category code (M90.8). A more specific billable subcode must be selected for claims submission.

MedCoder summary Summary composed by MedCoder from this code's official ICD-10-CM record. The tabular instructional notes themselves appear verbatim below.

Verify Before Coding

From the code registry, the Medicare Code Editor, and the MS-DRG Definitions Manual. Check it against a full claim in Claim Check.

Relationships & Classification

MedCoder structured relationships — computed from published CMS and AHRQ datasets

Other codes that name M90.8 or its code family, from the CMS ICD-10-CM tabular instructional notes. Tabular-note edges are stored at the code family level that carries each note.

Referenced by 1 Excludes1 note: M87 — Osteonecrosis (via M90.-).

These codes’ tabular lists mark this diagnosis as mutually exclusive — not reported together unless the conditions are documented as unrelated.

Contextual Map

Every relationship of M90.8 in one view: hierarchy, official tabular instructions in both directions, clinical classification, risk adjustment, MS-DRG participation, index terms and change history — each edge carrying the CMS source it derives from.

Run M90.8 with these 3 related codes in Claim Check

Hierarchy

Code First

Referenced by Excludes1 notes

  • M87 — Osteonecrosis[Excludes1](via M90.-): “osteochondropathies (M90-M93)”— CMS ICD-10-CM tabular instructional notes · icd10cm-fy2027

Nearest codes (40)

Change history

  • FY2016 — In the code set at ICD-10-CM adoption [Change history]— CMS release files (code change ledger) · icd10cm-fy2016

Relevant guides

Deep reference

Published questions and FAQ, every source behind this page with its release and checksum, the date-of-service check and the complete change history.

Common coding questions

MedCoder editorial

Can M90.8 be billed directly?

No. M90.8 (Osteopathy in diseases classified elsewhere) is a non-billable ICD-10-CM category code. A more specific billable subcode must be selected based on clinical documentation.

Sources for this page

Codes, titles, notes, index terms and mappings on this page are transcribed from the datasets below. Relationships MedCoder computed and text MedCoder wrote are labelled where they appear.

Code, title, tabular notes and index terms Official source data
CMS/CDC ICD-10-CM FY2027 tabular list, index and tables, effective October 1, 2026 Release, file and checksum · Publisher’s page
Claim edits Official source data
CMS Definitions of Medicare Code Edits — v44.0 (October 2026) Release, file and checksum · Publisher’s page
Change history and date-of-service validity Official source data
CMS ICD-10-CM release addenda, ingested release by release into the change ledger Release, file and checksum · Publisher’s page
Comparisons, relationships and the contextual map MedCoder structured relationship
Computed by MedCoder from the tabular notes and tables above; every derived relationship is marked as derived where it appears
Summary and FAQ answers MedCoder explanation
Written by MedCoder to explain the sources above: drafted with AI assistance, checked by a person against the release files, and labelled as MedCoder text where it appears. Not official text.

Current data releases:ICD-10-CM FY2027 · ICD-10-PCS FY2027 · HCPCS October 2026 · MS-DRG v44 · Medicare Code Editor v44.0 · NCCI PTP Q4 2026 · MUE Q4 2026 · NCD code lists 2026-01 · LCD export September 20, 2026 · All releases and sources

Labels on this page: Official source data · MedCoder structured relationship · MedCoder explanation. How to read the labels · All data sources and release dates · CMS coding rules

Cite this page

Reference this page in a research guide, syllabus or article. The release is included because code content changes each year.

MedCoder.ai. "M90.8 — Osteopathy in diseases classified elsewhere." ICD-10-CM FY2027. https://medcoder.ai/icd10/code/m90.8-osteopathy-in-diseases-classified-elsewhere

Change history

  • FY2016 — October 1, 2015
    In the code set at ICD-10-CM adoption
    Osteopathy in diseases classified elsewhere

No changes since FY2016 — additions, deletions, description changes and billable-status changes are tracked through FY2027, and none are recorded for this code. Note changes are tracked from FY2027 only.

Nearest Codes in This Family

Official ICD-10-CM classifications closest to M90.8 in its code family, with their registry titles.

View all codes in the M90 family