M81 ICD-10-CM Code: Osteoporosis without current pathological fracture
Compare with another code for M81Check this code on a claim
Billing Status: NO. This is a non-billable ICD-10-CM code: report a more specific billable code beneath it.
Coding at a Glance
- Official instructions
- 2 Excludes1 · 3 use-additional instructions
Category · FY2027A non-billable heading in the tabular list: report a more specific code beneath it.
What you need to know
Source: CMS/NCHS Official ICD-10-CM tabular notes, quoted. From the CMS/NCHS tabular list for the release in force. A note the category or block publishes applies to this code too, and is marked with where it comes from.
- Use additional codeReport with this code when documented
Where it sits Source: CMS/NCHS
Under:Chapter 13: Diseases of the Musculoskeletal System and Connective TissueM80-M94 Osteopathies and chondropathiesM80-M85 Disorders of bone density and structure
Codes under M81 (3)
Most relevant related codes MedCoder-derived
Read off the official notes above and this code’s own position in the tabular list. Which to report is a documentation question; Compare shows the two side by side.
Coding instructions
Official Tabular Instructional Notes: the inclusion, exclusion and sequencing notes published for M81 in the official ICD-10-CM tabular list, quoted as published.
Source: CMS/CDC — ICD-10-CM Tabular ListRelease: FY2027Effective: October 1, 2026
Trace:FY2027 changesChange historyRelease, file and checksum
Excludes1 — Not Coded Here
Conditions generally not reported together with this code (Excludes1) -- an error unless the two conditions are documented as unrelated to each other (ICD-10-CM Official Guidelines, Section I.A.12.a).
- osteoporosis with current pathological fracture (M80.-) Compare M81 vs M80 →
- Sudeck's atrophy (M89.0) Compare M81 vs M89.0 →
Coder workflow for M81
MedCoder structured workflow — derived from this code’s own official record
Before you code M81
- M81 is not reportable as written. Select the more specific code beneath it that the documentation supports. Codes are reported to the highest level of specificity the classification provides (Guidelines I.B.2).
See the relationships section · Guide: How to choose an ICD-10-CM code →
- Check the Excludes1 note: if the documentation supports a condition named there, do not simply proceed with the code beneath M81. Excludes1 conditions are not reported together with this code unless the record shows they are unrelated (Guidelines I.A.12.a).
Choose the right path
- Does the documentation support one of the more specific codes beneath M81?
Yes → Select that code and continue the checks below on its own page.
No → M81 cannot be reported as written. Where the codes beneath it include an unspecified code, that code applies when the record goes no further; otherwise query for the missing detail. - Does the documentation support a condition named in M81’s Excludes1 note?
Yes → Do not simply proceed: review the excluded code. Both are reported only when the record shows the two conditions are unrelated.
No → Continue.
Report the code beneath M81 that the documentation supports, not M81 itself. Then work the Use Additional Code note, and confirm that code is valid for the date of service on its own page.
Documentation check
- The provider’s diagnostic statement
- Codes are assigned from the provider’s documented diagnosis, not from clinical criteria, test values or a medication list (Guidelines I.A.19).
- The associated condition or complication
- Whether the associated condition the title names is documented; the “with” convention presumes some links, and a provider statement that the conditions are unrelated defeats it (Guidelines I.A.15).
- Open or closed; displaced or nondisplaced
- Defaults apply when the record is silent: closed, and displaced (Guidelines I.C.19.c).
- The conditions the Use Additional Code note names
- Reported with this code when documented; a conditional instruction (“if applicable”, “if known”) applies only when the record supports it.
Official instructions as workflow
Excludes1 — check before selecting M81(2 notes)
Coding workflow: If the documentation supports a condition named in this note, do not simply proceed with M81: the two are not reported together. The one exception is when the record shows the two conditions are unrelated to each other.
See the official tabular notes · Guidelines I.A.12.a
Use Additional Code — after identifying M81(3 notes)
Coding workflow: Check whether the documentation supports the additional code(s) the note names, and report them with M81 when it does. Where the instruction is conditional (“if applicable”, “if known”), it applies only when the record documents the condition.
See the official tabular notes · Guidelines I.A.13
Coding decision scenarios
Pattern scenarios for this code’s structure — decision rules, not clinical cases
Documentation: Both the condition M81 describes and a condition named in its Excludes1 note are documented for the same encounter.
Coding question: Can both codes be reported?
Path: Review the Excludes1 note and the excluded code, and look for a provider statement on whether the two conditions are related.
Reason: Excludes1 means the two are not coded together; the exception is when the record shows the conditions are unrelated to each other (Guidelines I.A.12.a).
Documentation: A condition the Use Additional Code note names is documented.
Coding question: Is a second code reported with the code beneath M81?
Path: Review the Use Additional Code note and the code it names.
Reason: The additional code is reported when the record documents the condition; a conditional instruction applies only when its condition is met (Guidelines I.A.13).
Every row is derived from this code’s own record — its title, tabular notes, 7th-character family and same-category siblings — with fixed MedCoder wording; nothing is inferred about a patient. The official notes and guideline text are in the sections each row links to, and they control.
Coding context
Guidelines, coding notes, decision aids, relationships (with MS-DRG and CCSR classification), hierarchy, HCC, coverage and the context map: what a coder reaches for after the core. Each section names whether it is official source data, a MedCoder-derived relationship or MedCoder editorial.
Code Overview
MedCoder summary Summary composed by MedCoder from this code's official ICD-10-CM record. The tabular instructional notes themselves appear verbatim below.
Official Coding Guidelines
Official source data — quoted verbatim from the CMS/NCHS Official Guidelines
Verbatim excerpts from the ICD-10-CM Official Guidelines for Coding and Reporting (CMS/NCHS) that govern this code.
Chapter 13: Diseases of the Musculoskeletal System and Connective Tissue (M00-M99)
1) Bone versus joint For certain conditions, the bone may be affected at the upper or lower end, (e.g., avascular necrosis of bone, M87, Osteoporosis, M80, M81).
Chapter 13: Diseases of the Musculoskeletal System and Connective Tissue (M00-M99)
d. Osteoporosis Osteoporosis is a systemic condition, meaning that all bones of the musculoskeletal system are affected. Therefore, site is not a component of the codes under category M81, Osteoporosis without current pathological fracture. The site codes under category M80, Osteoporosis with current pathological fracture, identify the site of the fracture, not the osteoporosis.
Chapter 13: Diseases of the Musculoskeletal System and Connective Tissue (M00-M99)
1) Osteoporosis without pathological fracture Category M81, Osteoporosis without current pathological fracture, is for use for patients with osteoporosis who do not currently have a pathologic fracture due to the osteoporosis, even if they have had a fracture in the past. For patients with a history of osteoporosis fractures, status code Z87.310, Personal history of (healed) osteoporosis fracture, should follow the code from M81.
Verify Before Coding
From the code registry, the Medicare Code Editor, and the MS-DRG Definitions Manual. Check it against a full claim in Claim Check.
Relationships & Classification
MedCoder-derived relationships — computed from published CMS and AHRQ datasets
Other codes that name M81 or its code family, from the CMS ICD-10-CM tabular instructional notes. Tabular-note edges are stored at the code family level that carries each note.
Referenced by 1 Excludes1 note: R29.890 — Loss of height.
These codes’ tabular lists mark this diagnosis as mutually exclusive — not reported together unless the conditions are documented as unrelated.
Referenced by 1 Code First instruction: M89.7 — Major osseous defect.
Each of these codes carries a Code First note naming this condition — when that code is reported, THIS code is sequenced first, ahead of it.
Contextual Map
Every relationship of M81 in one view: hierarchy, official tabular instructions in both directions, clinical classification, risk adjustment, MS-DRG participation, index terms and change history — each edge carrying the CMS source it derives from.
Run M81 with these 5 related codes in Claim Check
Hierarchy
- M00-M99 — Chapter 13: Diseases of the Musculoskeletal System and Connective Tissue (M00-M99) (M00-M99)[Hierarchy]— CMS ICD-10-CM tabular structure · icd10cm-fy2027
- M80-M85 — Disorders of bone density and structure[Hierarchy]— CMS ICD-10-CM tabular structure · icd10cm-fy2027
Excludes1
- M80 — Osteoporosis with current pathological fracture[Excludes1]: “osteoporosis with current pathological fracture (M80.-)”— CMS ICD-10-CM tabular instructional notes · icd10cm-fy2027
- M89.0 — Algoneurodystrophy[Excludes1]: “Sudeck's atrophy (M89.0)”— CMS ICD-10-CM tabular instructional notes · icd10cm-fy2027
Use Additional Code
- M89.7 — Major osseous defect[Use Additional Code]: “major osseous defect, if applicable (M89.7-)”— CMS ICD-10-CM tabular instructional notes · icd10cm-fy2027
- Z87.310 — Personal history of (healed) osteoporosis fracture[Use Additional Code]: “personal history of (healed) osteoporosis fracture, if applicable (Z87.310)”— CMS ICD-10-CM tabular instructional notes · icd10cm-fy2027
Referenced by Excludes1 notes
- R29.890 — Loss of height[Excludes1]: “osteoporosis (M80-M81)”— CMS ICD-10-CM tabular instructional notes · icd10cm-fy2027
Referenced by Code First instructions
- M89.7 — Major osseous defect[Code First]: “osteoporosis (M80.-, M81.-)”— CMS ICD-10-CM tabular instructional notes · icd10cm-fy2027
Nearest codes
- M81.0 — Age-related osteoporosis without current pathological fracture[Sibling]— CMS ICD-10-CM tabular structure · icd10cm-fy2027
- M81.6 — Localized osteoporosis [Lequesne][Sibling]— CMS ICD-10-CM tabular structure · icd10cm-fy2027
- M81.8 — Other osteoporosis without current pathological fracture[Sibling]— CMS ICD-10-CM tabular structure · icd10cm-fy2027
Change history
- FY2016 — In the code set at ICD-10-CM adoption [Change history]— CMS release files (code change ledger) · icd10cm-fy2016
Reference
Index terms and tables, published questions and FAQ, every source behind this page with its release and checksum, the date-of-service check and the complete change history.
Common coding questions
MedCoder editorial
Can M81 be billed directly?
No. M81 (Osteoporosis without current pathological fracture) is a non-billable ICD-10-CM category code. A more specific billable subcode must be selected based on clinical documentation.
Sources for this page
Codes, titles, notes, index terms and mappings on this page are transcribed from the datasets below. Relationships MedCoder computed and text MedCoder wrote are labelled where they appear.
- Code, title, tabular notes and index terms Official source data
- CMS/CDC ICD-10-CM FY2027 tabular list, index and tables, effective October 1, 2026 Release, file and checksum · Publisher’s page
- Coding guidelines Official source data
- ICD-10-CM Official Guidelines for Coding and Reporting (FY2027), quoted by section Release, file and checksum · Publisher’s page
- Claim edits Official source data
- CMS Definitions of Medicare Code Edits — v44.0 (October 2026) Release, file and checksum · Publisher’s page
- Change history and date-of-service validity Official source data
- CMS ICD-10-CM release addenda, ingested release by release into the change ledger Release, file and checksum · Publisher’s page
- Comparisons, relationships and the contextual map MedCoder-derived relationship
- Computed by MedCoder from the tabular notes and tables above; every derived relationship is marked as derived where it appears
- Summary and FAQ answers MedCoder editorial explanation
- Written by MedCoder to explain the sources above: drafted with AI assistance, checked by a person against the release files, and labelled as MedCoder text where it appears. Not official text.
Current data releases:ICD-10-CM FY2027 · ICD-10-PCS FY2027 · HCPCS October 2026 · MS-DRG v44 · Medicare Code Editor v44.0 · NCCI PTP Q4 2026 · MUE Q4 2026 · NCD code lists 2026-01 · LCD export September 28, 2026 · All releases and sources
Labels on this page: Official source data · MedCoder-derived relationship · MedCoder editorial explanation. How to read the labels · All data sources and release dates · CMS coding rules
Cite this page
Reference this page in a research guide, syllabus or article. The release is included because code content changes each year.
MedCoder.ai. "M81 — Osteoporosis without current pathological fracture." ICD-10-CM FY2027. https://medcoder.ai/icd10/code/m81-osteoporosis-without-current-pathological-fracture
Change history
- FY2016 — October 1, 2015In the code set at ICD-10-CM adoptionOsteoporosis without current pathological fracture
No changes since FY2016 — additions, deletions, description changes and billable-status changes are tracked through FY2027, and none are recorded for this code. Note changes are tracked from FY2027 only.
Nearest Codes in This Family
Official ICD-10-CM classifications closest to M81 in its code family, with their registry titles.